Oven Rack Push/Pull Construction

 

Click HERE to see the Oven Rack Push Pull Plans

Once you have complete the 1st 2 steps on the Plans you will be given a 1 1/2 inch by 11 inch piece of 1/2 inch piece of Pine

You will then layout 1/4 grid on your piece of Pine

You will then layout the Oven Rack Push/Pull pattern onto your piece of Pine

You will then drill a 1/4 of an inch hole using the Hand Drill in the end of your piece of Pine.

Using the Drill press you will drill a 1/4 of an inch hole in the front of you project.

You will then drill a hole in the notch in the middle of your project.

Using a Back Saw you will cut out the front notch.

What the completed step looks like.

You will then cut the notch out in the middle using the Back Saw.

What the completed step looks like

Using a file and Sandpaper you will clean up the rough cuts you made with the Back Saw on the front notch.

What the front notch looks like when you have completed this step.

Using a File and Sandpaper you will clean up the rough cuts you made with the Back Saw on the middle notch.

What the middle notch looks like when you have completed this step.

Using the Coping Saw this is the first cut you make when cutting out the handle of your project.

These two cuts makes it easier when you cut the curve on the next step.

Using the Coping Saw you the cut the curves for the handle.

Using a File and Sandpaper you will clean up the rough cuts you made with the Back Saw on the middle notch.

What the handle looks like when you have completed this step.

 

You will then round over all the edges with Sand Paper.

This is what your completed Oven Rack Push/Pull looks like when you are finished.

Oven Rack Push/Pull Demonstration

Using the Sanding Board you will round over the corners of the back of your project.

You are finish with this step when the end looks like this.

Using the Sanding Board you will round over the corners of the front of your project.

You are finish with this step when the front looks like this.

The video above shows how to construct the

Oven Rack Push Pull. To watch the videos individually click “HERE”. Below is an overview on how the Oven Rack Push Pull is constructed.